Application Scenario
Smart Home Appliances,IoT Data Transportation,
Smart Electricians,Smart Lighting and so on.
Detailed Parameters
-
Input Voltage: 2.7V ~ 3.3V
-
Processor: ARM Cortex-M4 Processor Core
-
Cortex-M4F core,up to 160MHz
-
26MHz clock input
- SWD/JTAG simulation debugger interface
-
Memory:
- 256K bytes SRAM
- 24K bytes Boot ROM
- 512 bytes OTP memory area
- 2M bytes XIP flash
-
Wi-Fi:
- IEEE 802.11 b/g/n 1T1R 2.4GHz Single Frequency
- Built-in power amplifier(PA) with self-calibration
- Support 802.11e QoS enhancement (WMM)
- Support WPA/WPA2 PSK,Open/WEP/ TKIP/CCMP
- Support IEEE Power Save mode
- Peripherals:
- 16 x GPIO
- 3 x SPI、2 x I2C、8 x PWM、8 x Timer
- 3 x UART,Support hardware flow control
- Up to 8 10-bit ADC channels
- RTC
-
Operating Temperature:
-
-40℃ to +105℃
-
Antenna Type:
-
On-Board PCB Antenna,or IPEX Connector
- Application Functions:
- Support AliOS and MXOS operating system
- Provide major cloud platforms access SDK
- Mass production firmware for typical applications such as smart appliances, lighting, and sockets
Interface and Dimension:
- Maintain pin compatibility with similar package modules
- EMW3070: 18mm x 33mm, stamp hole or pin EMW3070: 18mm x 33mm
Hardware Architecture:
Document Download:
The EMW307x series modules are mainly used for IoT data communication. Data collection and control is realized through a rich peripheral interface, and data can be transmitted to the Internet of Things cloud service platform through a Wi-Fi network connection to realize the Internet of Everything. This series of modules is used in a wide range of IoT applications through a variety of different form factors, interface types, antenna interfaces and temperature range.